Rohde & Schwarz R&S ZNA Series - Jitter

GUI reference
R&S
®
ZNA
816User Manual 1178.6462.02 ─ 29
Active
Enables/disables pre-emphasis.
Remote command:
CALCulate<Chn>:EYE:EMPHasis:STATe
Cursor Settings
Sets the weights of the filter taps in the pre-emphasis FIR filter.
Remote command:
CALCulate<Chn>:EYE:EMPHasis:CURSor:PRE
CALCulate<Chn>:EYE:EMPHasis:CURSor:POST<1|2>
Jitter
The "Define Eye Jitter" dialog allows you to add jitter to the digital signal simulated for
the eye diagram measurement.
Access: "Jitter" button in the Advanced Settings dialog
This dialog is available with Extended time domain analysis option R&S ZNA-K20 only.
Four types of jitter can be configured and selectively enabled: random, periodic, Dirac
and user defined. If enabled, the jitter is added at the start of each symbol period, and
its magnitude depends on the parameters specified in the dialog.
Applic softtool