Concepts and features
R&S
®
ZNA
281User Manual 1178.6462.02 ─ 29
Figure 4-25: R&S
VSE with pulse measurement application (option R&S VSE-K6)
How to configure
1. On the target R&S VSE, prepare the required analysis windows
(see the related user manuals)
2. On the R&S ZNA
a) prepare and run a "Pulse Profile" sweep
b) create a trace for the b-wave to be measured
c) set up and establish a VISA conncection to the target R&S VSE
d) start pushing data to the target R&S VSE
4.7.7 Millimeter-wave converter support
Option R&S ZNA-K8
Software option R&S ZNA-K8 adds convenient support of connected millimeter wave
converters to the R&S ZNA firmware. It requires R&S ZNAxx-B16 (Direct generator/
receiver access) or R&S ZNA-B26 (Direct IF access).
On a R&S ZNA67EXT, this hardware option is preinstalled.
Optional extensions and accessories
To Next Page
Loading...
