Command reference
R&S
®
ZNA
1017User Manual 1178.6462.02 ─ 29
NOTCh
Notch filter: Reject all information in specified time region and
pass everything else
*RST: BPASs
Example:
*RST; :CALC:FILT:TIME:STAT ON
Reset the instrument and enable the time gate.
CALC:FILT:TIME NOTCh
Select a notch filter in order to reject unwanted pulses.
Manual operation: See "Bandpass / Notch" on page 454
CALCulate<Chn>:FILTer[:GATE]:TIME:WINDow
<TimeGate>
Selects the time gate to be applied to the time domain transform.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<TimeGate> RECT | HAMMing | HANNing | BOHMan | DCHebyshev
RECT - steepest edges (rectangle)
HANN - normal gate (Hann)
HAMMing - steep edges (Hamming)
BOHMan - minimum flatness (Bohman)
DCHebyshev - arbitrary gate shape (Dolph-Chebychev)
*RST: HANN
Example: See CALCulate<Chn>:FILTer[:GATE]:TIME:DCHebyshev
Manual operation: See "Shape" on page 454
7.3.1.6 CALCulate:FMODel...
The CALCulate:FMODel... commands are related to "fixture modeling" tools (see
Chapter 4.6.2.9, "Fixture modeling and deembedding", on page 242).
● CALCulate:FMODel:DEASsistant....................................................................... 1017
● CALCulate:FMODel:DELT...................................................................................1023
● CALCulate:FMODel:EZD.................................................................................... 1033
● CALCulate:FMODel:ISD..................................................................................... 1038
● CALCulate:FMODel:SFD.................................................................................... 1047
● CALCulate:FMODel... (other)..............................................................................1051
CALCulate:FMODel:DEASsistant...
These commands implement the functionality of the Deembed Assistant tab and the
related Deembedding Assistant dock widget panel.
SCPI command reference
To Next Page
Loading...
