GUI reference
R&S
®
ZNA
872User Manual 1178.6462.02 ─ 29
Depending on the enabled versions, different parts of the Protocol subtab are enabled.
Note: If you activate v2c, version v1 is also active.
Remote command:
SYSTem:COMMunicate:SNMP:VERSion
Delete HUMS History
Allows you to delete the previousy collected health and monitoring information from the
instrument.
Remote command:
DIAGnostic:HUMS:DELete:ALL
Export HUMS History
Allows you to export the previousy collected health and monitoring information to a zip-
ped JSON file.
Remote command:
DIAGnostic:HUMS:DELete:ALL
Protocol subtab
Gives access to SNMP configuration options for protocol version 2c and 3.
SNMPv2c Configuration
Allows you to grant read or read-write access via SNMPv2c, and to specify the related
community string.
An SNMP community represents a collection of devices and agents grouped to monitor
them. Authorized managers and the managed devices belong to an SNMP community.
You can specify different communities for read-write and read-only access.
Remote command:
SYSTem:COMMunicate:SNMP:COMMunity:RO
SYSTem:COMMunicate:SNMP:COMMunity:RW
SNMPv3 Configuration
Allows you to enable and configure the SNMPv3-specific authentication and privacy
features (passwords for access security and data encryption).
Setup softtool
To Next Page
Loading...
