Rohde & Schwarz R&S ZNA Series - Page 1674

Command reference
R&S
®
ZNA
1674User Manual 1178.6462.02 ─ 29
SYSTem:COMMunicate:SNMP:USM:USER:ALL?
Queries the number of users and a list of all SNMP users for SNMPv3.
Prerequisites for this command:
●
Select SNMPv3 (SYSTem:COMMunicate:SNMP:VERSion on page 1674).
Return values:
<Count> Total number of registered SNMP users.
<Name> List of all user names as a comma-separated list.
Example: //Return all SNMP users
SYST:COMM:SNMP:USM:USER:ALL?
Usage: Query only
Manual operation: See "SNMPv3 Configuration" on page 872
SYSTem:COMMunicate:SNMP:USM:USER:DELete
<UserName>
Deletes a specific SNMP user profile.
Setting parameters:
<UserName> String containing name of SNMP user profile to be deleted.
Example: //Delete SNMP user profile
SYST:COMM:SNMP:USM:USER:DEL "Peter"
Usage: Setting only
Manual operation: See "SNMPv3 Configuration" on page 872
SYSTem:COMMunicate:SNMP:USM:USER:DELete:ALL
Deletes all SNMP user profiles.
Example:
//Delete all SNMP user profiles
SYST:COMM:SNMP:USM:USER:DEL:ALL
Usage: Event
Manual operation: See "SNMPv3 Configuration" on page 872
SYSTem:COMMunicate:SNMP:VERSion <SnmpVersion>
Selects the SNMP version.
Parameters for setting and query:
<SnmpVersion> OFF | V12 | V123 | V3 | DEFault
OFF
SNMP communication is off.
V12
SNMP communication with SNMPv2 or lower.
HUMS and service date commands