Rohde & Schwarz R&S ZNA Series - 7.3.2 CONFigure commands

Command reference
R&S
®
ZNA
1202User Manual 1178.6462.02 ─ 29
OFF
Use the actual a-waves, depending on the imbalance parame-
ters
*RST: OFF
Example: See SOURce<Ch>:TDIF:IMBalance:AMPLitude:LPORt
on page 1594
Options: R&S ZNA-K61
Manual operation: See "Compensate Imbalance" on page 705
CALCulate:TDVSwr[:STATe] <Boolean>
Enables/disables time domain site VSWR measurements.
Parameters:
<Boolean> ON | OFF – TD-VSWR on or off.
*RST: OFF
Manual operation: See "TD-VSWR" on page 450
7.3.2 CONFigure commands
The CONFigure... commands create and delete channels or traces, assign channel
and trace names, and define the channel sweep order. The commands are device-spe-
cific.
CONFigure:CHANnel:CATalog?.....................................................................................1203
CONFigure:CHANnel:MEASure:ACTive[:STATe]............................................................. 1203
CONFigure:CHANnel:MEASure:ALL[:STATe].................................................................. 1203
CONFigure:CHANnel:MEASure:OPTimized....................................................................1203
CONFigure:CHANnel<Ch>:MEASure[:STATe].................................................................1204
CONFigure:CHANnel<Ch>:NAME................................................................................. 1205
CONFigure:CHANnel<Ch>:NAME:ID?........................................................................... 1205
CONFigure:CHANnel<Ch>[:STATe]................................................................................1206
CONFigure:CHANnel<Ch>:TRACe:CATalog?................................................................. 1206
CONFigure:CHANnel<Ch>:TRACe:REName.................................................................. 1206
CONFigure:TRACe:CATalog?........................................................................................1207
CONFigure:TRACe<Trc>:CHANnel:NAME?....................................................................1208
CONFigure:TRACe<Trc>:CHANnel:NAME:ID?............................................................... 1208
CONFigure:TRACe<Trc>:NAME....................................................................................1208
CONFigure:TRACe<Trc>:NAME:ID?..............................................................................1209
CONFigure:TRACe<Trc>:REName................................................................................1209
CONFigure:TRACe:WINDow?.......................................................................................1209
CONFigure:TRACe:WINDow:TRACe?........................................................................... 1210
SCPI command reference