Rohde & Schwarz R&S ZNA Series - 5.7.3.3 Marker Config dialog

GUI reference
R&S
®
ZNA
508User Manual 1178.6462.02 ─ 29
Note: The marker Search Ranges are identical to the evaluation ranges for trace sta-
tistics. For more information, see Chapter 5.5.8.2, "Evaluation Range dialog",
on page 461.
Remote command:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER[:RANGe]
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER[:RANGe]
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER:STARt
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER:STARt
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER:STOP
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER:STOP
Range Limit Lines On
Displays or hides the range limit lines in the diagram area. Range limit lines are two
vertical lines at the Start and Stop values of the active search range ("Range 1" to
"Range 10").
The line color can be modified by a user-defined color scheme (Element "Vertical
Range Lines").
Remote command:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER:SHOW
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER:SHOW
5.7.3.3 Marker Config dialog
The "Marker Config" dialog allows you to configure the peak searches for the active
trace and all its markers.
Access:
●
Trace – [Marker] > "Marker Search" > "Marker Config..."
●
Trace – [Marker] > "Multiple Peak" > "Marker Config..."
Marker softtool