Rohde & Schwarz R&S ZNA Series - 7.3.1.9 CALCulate:MARKer...

Command reference
R&S
®
ZNA
1073User Manual 1178.6462.02 ─ 29
7.3.1.9 CALCulate:MARKer...
The CALCulate:MARKer... commands control the marker functions. The com-
mands are device-specific and beyond what is specified in the SCPI subsystem
SOURce:MARKer....
Marker addressing
For all these commands, markers are addressed via:
1. Channel number <Chn>
The command operates on the active trace of channel <Chn>.
2. Marker number <Mk>
Selects a particular marker (ignored for reference markers).
The command operates on marker <Mk> of channel <Chn>'s active trace.
CALCulate<Chn>:MARKer<Mk>:AOFF.......................................................................... 1074
CALCulate<Chn>:MARKer<Mk>:BWIDth........................................................................1075
CALCulate:MARKer:COUPled[:STATe]........................................................................... 1076
CALCulate:MARKer:COUPled:TYPE..............................................................................1076
CALCulate<Chn>:MARKer:DEFault:FORMat..................................................................1077
CALCulate<Chn>:MARKer<Mk>:DELTa[:STATe]............................................................. 1079
CALCulate<Chn>:MARKer<Mk>:EXCursion................................................................... 1079
CALCulate<Chn>:MARKer<Mk>:REFerence:EXCursion..................................................1079
CALCulate<Chn>:MARKer<Mk>:EXCursion:STATe......................................................... 1079
CALCulate<Chn>:MARKer<Mk>:REFerence:EXCursion:STATe........................................1079
CALCulate<Chn>:MARKer<Mk>:FORMat...................................................................... 1080
CALCulate<Chn>:MARKer<Mk>:REFerence:FORMat..................................................... 1080
CALCulate:MARKer:FUNCtion:BWIDth:GMCenter.......................................................... 1080
CALCulate<Chn>:MARKer<Mk>:FUNCtion:BWIDth:MODE..............................................1081
CALCulate<Chn>:MARKer<Mk>:FUNCtion:CENTer........................................................ 1081
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:CENTer....................................... 1081
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER[:RANGe]................................1082
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER[:RANGe]...............1082
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER:SHOW...................................1082
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER:SHOW..................1082
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER:STARt....................................1083
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER:STOP.................................... 1083
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER:STARt.................. 1083
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER:STOP...................1083
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute...................................................... 1083
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:EXECute..................................... 1083
CALCulate<Chn>:MARKer<Mk>:FUNCtion:RESult?........................................................1084
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:RESult?...................................... 1084
CALCulate<Chn>:MARKer<Mk>:FUNCtion:SPAN........................................................... 1085
CALCulate<Chn>:MARKer<Mk>:FUNCtion:SPECtrum.................................................... 1085
CALCulate<Chn>:MARKer<Mk>:FUNCtion:STARt.......................................................... 1085
CALCulate<Chn>:MARKer<Mk>:FUNCtion:STOP...........................................................1085
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:STARt......................................... 1085
SCPI command reference