Concepts and features
R&S
®
ZNA
135User Manual 1178.6462.02 ─ 29
sweeps) or the CW frequency (for power sweeps), and the measurement band-
width ("BW").
●
Stop indicates the highest value of the sweep variable (e.g. the highest frequency
measured), corresponding to the right edge of a Cartesian diagram.
Open a segment's context menu to access common related tasks.
Example:
The following context menu is assigned to the channel name section:
The settings in the context menus correspond to the most common functions in the
Channel – [Channel Config] > "Channels" softtool tab, the "Stimulus" softtool (opened
via Stimulus keys), the Channel – [Sweep] > "Sweep Params" softtool tab, and the
Channel – [Pwr Bw Avg] softtool.
4.2.1.5 Context menus
To provide access to the most common tasks and speed up the operation, the analyzer
offers context menus (right-click menus) for the following display elements:
●
Diagram
●
Marker info field
●
Trace list (separate context menus for trace name section, measured quantity sec-
tion, format section, scale section, and channel section)
●
Channel list (separate context menus for channel name section, sweep range sec-
tion, additional parameter section)
To open a context menu associated with a display element, tap and hold the element
for some seconds. Right-click the display element if you are using a mouse.
Example:
The following context menu is assigned to the channel name section in the channel list:
Screen elements
To Next Page
Loading...
