GUI reference
R&S
®
ZNA
796User Manual 1178.6462.02 ─ 29
Access: DUT Manager dialog > "Edit..." with a DUT of type "Amplifier" selected
5.16.2.3 Mixer Configuration dialog
The "Mixer Configuration" dialog allows you to set up the fundamental properties of a
mixer.
Access: DUT Manager dialog > "Edit..." with a DUT of type "Mixer" selected
The DUT type "Mixer" is only availble if the instrument is equipped with software
optionR&S ZNA-K4. See Chapter 4.7.3, "Frequency conversion measurements",
on page 261.
DUT softtool
To Next Page
Loading...
