Rohde & Schwarz R&S ZNA Series - 5.20 Help softtool

GUI reference
R&S
®
ZNA
927User Manual 1178.6462.02 ─ 29
●
The ICC does not support hot plugging of ICUs, so connect the ICUs to the ICC
before connecting the ICC to the R&S ZNA.
●
For background information, see Chapter 4.5.5.4, "Inline calibration", on page 211.
Configured Devices
Each ICC R&S ZN-Z30 is listed with its connected Inline Calibration Units (ICUs)
R&S ZN-Z32 and R&S ZN-Z33.
Remote command:
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess:SUBModule:ALL?
5.20 Help softtool
The "Help" softtool presents the functions of the menu bar's "Help" menu, except call-
ing context sensitive help.
Access: "Help" – "Contents..." | "Index..." | "About..." from the menu bar.
Contents...
Opens the help browser and activates its "Contents" tab.
The "Contents" tab displays the table of contents of the analyzer's online help.
Help softtool