GUI reference
R&S
®
ZNA
441User Manual 1178.6462.02 ─ 29
New memory traces are named "Mem<n>[<Data_Trace>]" with <n> selected by the
analyzer firmware to make trace names unique.
Remote command:
n/a
Show All Data / Hide All Data / Show All Mem / Hide All Mem
Displays or hides all data or memory traces in the active recall set. Hidden traces are
not deleted.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
Delete All Mem
Deletes all memory traces in the active recall set.
Tips:
●
Use the Trace Manager dialog to hide or delete arbitrary sets of traces.
●
Use the UNDO function of the analyzer to restore a trace that was unintentionally
deleted.
Remote command:
CALCulate:PARameter:DELete:MEMory
5.5.4 Math tab
Allows you to define mathematical operations on traces.
Background information
Refer to "Trace types" on page 126.
Traces softtool
To Next Page
Loading...
