Rohde & Schwarz R&S ZNA Series - 3.1.11 Connecting external accessories; 3.1.11.1 Connecting a monitor

Getting Started
R&S
®
ZNA
32User Manual 1178.6462.02 ─ 29
A software update restores the original shortcut properties.
3.1.11 Connecting external accessories
The analyzer's standard PC interfaces (Monitor, USB, LAN) can be used to connect
various accessories:
●
An external monitor displays the Windows
®
desktop plus the vector network ana-
lyzer (VNA) application windows.
●
External keyboard and mouse simplify local control, in particular manual (GUI)
operation of the VNA application.
●
A printer can be used to create hard copies of the measurement diagrams and
traces from within the VNA application.
●
A LAN connection can be established to access the analyzer's mass storage or
control the analyzer from an external PC.
●
The R&S ZNA can also be remote controlled via USB.
External monitor, keyboard and mouse are not required for local operation. The
R&S ZNA can be fully controlled by tapping the touchscreen.
3.1.11.1 Connecting a monitor
A standard monitor can be connected to the DVI-D connector of the R&S ZNA. No
extra configuration is required.
Preparing for use