GUI reference
R&S
®
ZNA
878User Manual 1178.6462.02 ─ 29
Configured External Switch Matrices
The "Hardware" tab also provides information about connected switch matrices. In par-
ticular, for mechanical matrices the current relay switch counts are reported (if suppor-
ted by the matrix).
Remote command:
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:RELays:SWITch:COUNt?
Selftest tab
Allows you to run an automatic selftest on the analyzer, and to display its results.
Check "Show Details" to see the detailed test results.
Error Log tab
Contains a chronological record of errors that occurred in the current and in previous
sessions (see Chapter 9.1, "Errors during firmware operation", on page 1766).
The "Error" tab comes with an additional button for clearing the log ("Delete Error
Log").
Setup softtool
To Next Page
Loading...
