Rohde & Schwarz R&S ZNA Series - 7.4.4 Utilization commands

Command reference
R&S
®
ZNA
1686User Manual 1178.6462.02 ─ 29
The query returns the key-value pair for a given ID or an empty string if the ID is
unknown.
Parameters:
<Key> String containing key name of the queried tag.
<Value> String containing value of the queried tag.
Parameters for setting and query:
<ID> 0 - 31
ID number of the tag you want to modify or query.
To identify the ID number, query all device tags from the system
first. For more information, read here DIAGnostic:HUMS:
TAGS:ALL? on page 1685.
Example: //Add or modify a tag (tag 1)
DIAG:HUMS:TAGS 1,'location','building_11'
Manual operation: See "Add / Delete (Trash) / Delete All" on page 873
DIAGnostic:HUMS:TAGS:DELete <ID>
Deletes a certain tag you assigned to your instrument, including its key and value.
Setting parameters:
<ID> ID number of the tag you want to delete.
To identify the ID number, query all device tags from the system
first. For more information, see DIAGnostic:HUMS:TAGS:
ALL? on page 1685.
Example: //Delete tag
DIAG:HUMS:TAGS:DEL 0
Usage: Setting only
Manual operation: See "Add / Delete (Trash) / Delete All" on page 873
DIAGnostic:HUMS:TAGS:DELete:ALL
Deletes all key-value tags you have assigned to the instrument.
Example:
//Delete all tags
DIAG:HUMS:TAGS:DEL:ALL
Usage: Event
Manual operation: See "Add / Delete (Trash) / Delete All" on page 873
7.4.4 Utilization commands
Using these commands you can retrieve the utilization information provided by the
R&S HUMS.
They all require software option R&S ZNA-980.
HUMS and service date commands