Rohde & Schwarz R&S ZNA Series - Page 1687

Command reference
R&S
®
ZNA
1687User Manual 1178.6462.02 ─ 29
DIAGnostic:HUMS:UTILization?.................................................................................... 1687
DIAGnostic:HUMS:UTILization:ACTivity:TRACking:STATe................................................1688
DIAGnostic:HUMS:UTILization:CUSTom:ADD.................................................................1688
DIAGnostic:HUMS:UTILization:CUSTom:ALL?................................................................1689
DIAGnostic:HUMS:UTILization:CUSTom:DELete.............................................................1689
DIAGnostic:HUMS:UTILization:CUSTom:DELete:ALL......................................................1690
DIAGnostic:HUMS:UTILization:CUSTom:UPDate............................................................ 1690
DIAGnostic:HUMS:UTILization:HISTory?........................................................................1690
DIAGnostic:HUMS:UTILization:HISTory:DELete:ALL....................................................... 1692
DIAGnostic:HUMS:UTILization:HISTory:DETailed?.......................................................... 1692
DIAGnostic:HUMS:UTILization?
Queries the current utilization data of the instrument.
Depending on the set data format, the queried utilization data is either displayed in XML
or JSON format. For more information about setting the data format, see
DIAGnostic:HUMS:FORMat on page 1679.
Return values:
<UtilizationData> <block_data>
Returns the current utilization data of the connected instrument
as block data.
#blockdata[{utilization1},{utilization2},...]
Binary block data with the following syntax:
#<Digits><Length><Binarydata>
#
Indicates the start of the binary block
<Digits>
Decimal value
Gives the number of decimal digits used for the <Length>
value
<Length>
Decimal value
Number of bytes the follow in the <Binary data> part
<Binary data>
Binary data in ASCII format
For each utilization it returns the following values:
<id>,<scope>,<reference>,<unit>,<description>,
<value>,<startvalue>,<state>
Example:
//Return utilization data
DIAG:HUMS:UTIL?
Returns for example:
#123456[{"id":31719936,"scope":
"DEVICE_SPECIFIC","reference":null,"name":
"Self alignments","unit":
"counter","description":
"Report number of self alignments","value":
0,"startupValue":
0,"activityTracking":true},...]
HUMS and service date commands