GUI reference
R&S
®
ZNA
847User Manual 1178.6462.02 ─ 29
Remote command:
No command; display configuration only.
Info Window
Shows/hides the Info Window
Remote command:
DISPlay:IWINdow[:STATe]
Font Size
Scales the fonts in the diagrams. The scaling affects the trace and channel lists, and
the info fields.
Remote command:
DISPlay:RFSize
Auto Adjust Windows
Resets the position and size of the application window and the control window.
Couple Ctrl Window Pos
If checked (default), the relative position of the application window and the control win-
dow is locked: if you drag one of them, then both windows move together.
Single Window Mode
If enabled (default), the control window is visisble. Otherwise it is hidden and the "Hard
Key" panel is displayed.
5.18.3.2 Define User Color Scheme dialog
The "Define User Color Scheme" dialog allows you to configure user-defined diagram
color schemes for display and print. User-defined color schemes can be saved to a file
for later re-use.
Access:
●
System – [Display] > "Config" > "Define User Color..."
●
Printer Setup dialog > "Print" tab > "Define Print Color..."
Related settings
Refer to "Color Scheme" on page 845.
Display softtool
To Next Page
Loading...
