Rohde & Schwarz R&S ZNA Series - 7.3.17 SYSTem commands; 7.3.17.1 SYSTem:COMMunicate...

Command reference
R&S
®
ZNA
1604User Manual 1178.6462.02 ─ 29
STATus:QUEue[:NEXT]?
Queries and at the same time deletes the oldest entry in the error queue. Operation is
identical to that of SYSTem:ERRor[:NEXT]?.
The entry consists of an error number and a short description of the error. Positive
error numbers are instrument-dependent. Negative error numbers are reserved by the
SCPI standard; see section Chapter 9, "Error messages and troubleshooting",
on page 1766.
Example:
STAT:QUE?
Query the oldest entry in the error queue. 0,"No error" is
returned if the error queue is empty.
Usage: Query only
7.3.17 SYSTem commands
The SYSTem... commands provide functions that are not related to instrument perfor-
mance, such as functions for general housekeeping and functions related to global
configurations.
7.3.17.1 SYSTem:COMMunicate...
The SYSTem:COMMunicate... commands provide remote control settings and con-
figure remote (external) devices controlled by the R&S ZNA.
SYSTem:COMMunicate:AKAL:CONNection....................................................................1605
SYSTem:COMMunicate:AKAL:MMEMory[:STATe]........................................................... 1606
SYSTem:COMMunicate:CODec.....................................................................................1606
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess............................................................. 1606
SYSTem:COMMunicate:GPIB[:SELF]:DCLear:SUPPress.................................................1607
SYSTem:COMMunicate:GPIB[:SELF]:INIT:WAIT............................................................. 1607
SYSTem:COMMunicate:GPIB[:SELF]:LPORt:ALIGn........................................................1607
SYSTem:COMMunicate:GPIB[:SELF]:RTERminator........................................................ 1608
SYSTem:COMMunicate:NET:HOSTname....................................................................... 1608
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess..........................................................1608
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess:ALL?................................................. 1609
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess:SUBModule:ALL?............................... 1609
SYSTem:COMMunicate:RDEVice:AKAL:CKIT.................................................................1609
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:CATalog?.................................................. 1610
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:STANdard:CATalog?...................................1611
SYSTem:COMMunicate:RDEVice:AKAL:DATE?..............................................................1612
SYSTem:COMMunicate:RDEVice:AKAL:FRANge?..........................................................1612
SYSTem:COMMunicate:RDEVice:AKAL:PORTs?............................................................1613
SYSTem:COMMunicate:RDEVice:AKAL:PREDuction[:STATe].......................................... 1613
SYSTem:COMMunicate:RDEVice:AKAL:SDATa?............................................................ 1613
SYSTem:COMMunicate:RDEVice:AKAL:WARMup[:STATe]?.............................................1614
SYSTem:COMMunicate:RDEVice:GDEVice:CATalog?..................................................... 1614
SYSTem:COMMunicate:RDEVice:GDEVice<Gdev>:DEFine.............................................1615
SCPI command reference