GUI reference
R&S
®
ZNA
474User Manual 1178.6462.02 ─ 29
Select All / Deselect All
During trace data import, selects/deselects all traces contained in the opened trace file.
Auto Distribute
Available for trace data import only.
If checked, a selected trace S
ij
is imported as a memory trace for all data traces in the
current recall set that are measuring S
ij
.
Remote command:
MMEMory:LOAD:TRACe:AUTO
5.5.11.4 Select Ports dialog
The "Select Ports" dialog defines the port assignment for the created Touchstone
(*.s<n>p) file.
Access: Trace – [Trace Config] > "Trace Data" > "snp Free Config..."
Touchstone files and file export
Note the conditions described in "Conditions for Touchstone file export" on page 183.
Traces softtool
To Next Page
Loading...
