Rohde & Schwarz R&S ZNA Series - Stimulus dialog

GUI reference
R&S
®
ZNA
681User Manual 1178.6462.02 ─ 29
Figure 5-32: Displayed Columns dialog (custom tab)
For the predefined tabs, only the "General" and the tab's related parameter group
("Arbitrary Frequency", "Arbitrary Power", "Receiver Level", or "Input / Output") are
available for selection.
Stimulus dialog
The "Stimulus" dialog gives access to the parameters of a non-segmented sweep.
Access: Port Settings dialog > "Edit Stimulus..."
Figure 5-33: Stimulus Dialog: Linear Frequency Sweep
Channel Config softtool