GUI reference
R&S
®
ZNA
875User Manual 1178.6462.02 ─ 29
Create R&S Support Information
Saves the current selftest results to a zipped report file you can send to R&S Support
for fault diagnosis; see Chapter 9.3, "Collecting information for technical support",
on page 1768.
Remote command:
DIAGnostic:DEVice:STATe
SYSTem:DFPRint?
Setup tab
Displays the channel and trace settings of the active recall set and the main character-
istics of the instrument, including its IP address.
Setup softtool
To Next Page
Loading...
