GUI reference
R&S
®
ZNA
409User Manual 1178.6462.02 ─ 29
●
The "Setup Frequency Converting DUT" button opens the Scalar Mixer Meas setup
dialog that allows you to prepare one or more channels for Scalar mixer measure-
ments.
●
The "More ..." buttons open the Frequency Converting Measurements dialog that
offers all available measurement parameters for scalar mixer measurements.
5.2.13.1 Scalar Mixer Meas setup dialog
The "Scalar Mixer Meas" dialog is an example of a Multi-channel setup dialog. It allows
you to prepare one or more channels for Scalar mixer measurements.
Access: Trace – [Meas] ("Mixer Params") > "Scalar Mixer Meas" > "Setup Frequency
Converting DUT"
Background information
Refer to the following sections:
●
Chapter 4.2.2.3, "Multi-channel setup dialog", on page 139
●
Chapter 4.7.3.4, "Scalar mixer measurements", on page 271
●
"Two-stage mixer measurements" on page 271
Meas softtool
To Next Page
Loading...
