Rohde & Schwarz R&S ZNA Series - 7.5 R&S ZVR;ZVABT compatible commands

Command reference
R&S
®
ZNA
1695User Manual 1178.6462.02 ─ 29
Manual operation: See "Recommended Calibration Interval" on page 880
DIAGnostic:SERVice:DATE <ServiceDate>
Defines the last date and time the instrument was serviced (ISO 8601 format).
Parameters:
<ServiceDate> String containing last service date.
Example: //Return last service date
DIAG:SERV:DATE?
Manual operation: See "Last Service" on page 880
DIAGnostic:SERVice:STATe?
Queries the state if the instrument requires service.
Return values:
<ServiceState> NAN
Not a number, e.g. if no service date is set.
OK
Instrument is OK. No service is needed.
DEViations
Deviations have been detected. Service might be required soon.
REQuired
Instrument requires service.
Example: //Return service state
DIAG:SERV:STAT?
Usage: Query only
7.5 R&S ZVR/ZVABT compatible commands
The commands in this chapter are supported for compatibility with analyzers of the
R&S ZVR and R&S ZVAB family; they do not introduce any new functionality. For new
programs, it is recommended to use the commands in Chapter 7.3, "SCPI command
reference", on page 971.
CALCulate<Chn>:LIMit:CONTrol:DOMain.......................................................................1696
CALCulate<Chn>:LIMit:RDOMain:COMPlex................................................................... 1697
CALCulate<Chn>:LIMit:RDOMain:FORMat.....................................................................1698
CALCulate<Chn>:LIMit:RDOMain:SPACing.................................................................... 1698
CALCulate<Chn>:LIMit:LOWer:STATe............................................................................1698
CALCulate<Chn>:LIMit:UPPer:STATe............................................................................ 1698
CALCulate<Ch>:PARameter:DEFine..............................................................................1699
CALCulate<Chn>:MARKer<Mk>:FUNCtion:BWIDth........................................................ 1700
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DELTa:STATe................................................ 1701
R&S ZVR/ZVABT compatible commands