GUI reference
R&S
®
ZNA
525User Manual 1178.6462.02 ─ 29
The lists include external generator and power meter ports. The "Frequency" list is dis-
abled while the frequency conversion is switched off.
Remote command:
[SENSe<Ch>:]SWEep:AXIS:FREQuency
[SENSe<Ch>:]SWEep:AXIS:POWer
5.8.2 Power tab
The "Power" tab provides settings related to transmit and receive power. It is also dis-
played on the "Pwr Bw Avg" softtool.
5.8.2.1 Controls on the Power tab
left
= R&S ZNA with 4 physical ports
right = R&S ZNA with > 4 physical ports on the VNA and connected switch matrices
If an external switch matrix is used, then most of the controls on the "Power" tab are
hidden. If available, the corresponding functionality can be configured in the Arbitrary
Power tab of the Chapter 5.12.2.2, "Port Settings dialog", on page 668.
Stimulus softtool
To Next Page
Loading...
