Rohde & Schwarz R&S ZNA Series - Page 1470

Command reference
R&S
®
ZNA
1470User Manual 1178.6462.02 ─ 29
[SENSe<Ch>:]PULSe:GENerator<Id>:TRAin:DATA {<Set pulse train element
active>, <Set pulse train element start time>, <Set pulse train element stop
time>}...
Suffix:
<Ch>
.
<Id>
Setting parameters:
<Set pulse train
element active>
<Set pulse train
element start time>
<Set pulse train
element stop time>
Usage: Setting only
[SENSe<Ch>:]PULSe:GENerator<Id>:TRAin:DELete:ALL
Suffix:
<Ch>
.
<Id>
Usage: Event
[SENSe<Ch>:]PULSe:GENerator:TRAin:PERiod <Period for the generated pulses>
Suffix:
<Ch>
.
Parameters:
<Period for the
generated pulses>
Manual operation: See "Pulse Train Period" on page 697
[SENSe<Ch>:]PULSe:GENerator<Id>:TRAin:SEGMent<Seg>:COUNt <Number of
segments in the pulse train>
Suffix:
<Ch>
.
<Id>
<Seg>
Parameters:
<Number of segments
in the pulse train>
SCPI command reference