Rohde & Schwarz R&S ZNA Series - Page 515

GUI reference
R&S
®
ZNA
515User Manual 1178.6462.02 ─ 29
The "Eval Range..." button opens the "Evaluation Range" dialog that allows you to nar-
row the "Bandfilter" search to a particular stimulus range. See Evaluation Range dia-
log.
Bandwidth
Specifies the minimum excursion of the bandpass and bandstop peaks.
●
A bandpass peak must fall off on both sides by the specified <Bandwidth> value to
be considered a valid peak.
●
A bandstop peak must be <Bandwidth> below the maximum level in the search
range (bandpass value) to be considered a valid peak.
Remote command:
CALCulate<Chn>:MARKer<Mk>:BWIDth
Marker softtool