Rohde & Schwarz R&S ZNA Series - Page 1283

Command reference
R&S
®
ZNA
1283User Manual 1178.6462.02 ─ 29
MMEMory:LOAD:CORRection <Channel>[, <CalGroupFile>]
Applies a system error correction data set stored in the cal pool (cal group file) to chan-
nel <Channel>.
Parameters:
<Channel> Channel number of an existing channel. ALL applies the
selected data set to all channels.
<CalGroupFile> String parameter to specify the name of the cal group file to be
loaded. Cal group files must have the extension *.cal. The
directory path must not be specified; the analyzer always uses
the default cal pool directory C:\Users\Public\Documents
\Rohde-Schwarz\ZNA\Calibration\Data.
Example:
MMEM:STOR:CORR 1,'Calgroup1.cal'
Copy the current correction data set of channel 1 to a cal group
file Calgroup1.cal.
CONF:CHAN2:STAT ON; :MMEM:LOAD:CORR 2,
'Calgroup1.cal'
Apply the stored correction data (cal group file) to channel 2.
MMEM:LOAD:CORR? 2
Query the cal group file for channel 2. Response:
'Calgroup1.cal'
MMEM:LOAD:CORR:RES 2,'Calgroup1.cal'
Resolve the pool link between channel 2 and the cal group file.
MMEM:LOAD:CORR? 2
Query the cal group file for channel 2. Response: ''
MMEM:DEL:CORR 'Calgroup1.cal'
Delete the created cal group file.
Manual operation:
See "Add / Add All... / Replace / Apply / Apply to All"
on page 639
MMEMory:LOAD:CORRection:MERGe <Channel>[, <CalGroupFile>[,
<CalGroupFile>]...]
Merges (activates) several cal group files for channel no. <Channel> so that the query
[SENSe<Ch>:]CORRection:COLLect:METHod:DEFine? returns a list of all
merged calibration types (equivalent to the calibration pool list in the "Calibration Man-
ager" dialog). The merged cal group files can be stored to a common file (see exam-
ple).
Note that the calibrations to be merged must be based on the same frequency grid
(identical frequency sweep points).
Setting parameters:
<Channel> Channel number of an existing channel
<CalGroupFile>
SCPI command reference