Rohde & Schwarz R&S ZNA Series - Page 340

GUI reference
R&S
®
ZNA
340User Manual 1178.6462.02 ─ 29
Table 5-1: Function keys and softtools
Function Key Keyboard Shortcut Related Softtool Action
Trace – [Meas] Alt + Shift + A Meas softtool default
Trace – [Format] Alt + Shift + B Format softtool default
Trace – [Scale] Alt + Shift + C Scale softtool default
Trace – [Trace Config] Alt + Shift + D Traces softtool default
Trace – [Line] Alt + Shift + E Lines softtool default
Trace – [Marker] Alt + Shift + G Marker softtool default
Stimulus – [Start] Alt + Shift + J Stimulus softtool Selects an input control corresponding to the start,
stop, center or span of the active channel's current
sweep type.
Activates the corresponding tab on the "Stimulus"
softtool.
Stimulus – [Stop] Alt + Shift + K
Stimulus – [Center] Alt + Shift + F
Stimulus – [Span] Alt + Shift + H
Channel – [Pwr Bw Avg] Alt + Shift + L Pwr Bw Avg softtool default
Channel – [Sweep] Alt + Shift + M Sweep Softtool default
Channel – [Cal] Alt + Shift + P Cal softtool default
Channel – [Chan-
nel Config]
Alt + Shift + O Channel Config softtool default
Channel – [Mode] Alt + Shift + R Mode softtool default
Channel – [Off-
set Embed]
Alt + Shift + Q Offset Embed softtool default
System – [File Print] Ctrl + O File Print softtool default
System – [DUT] Ctrl + P DUT softtool default
Function keys and softtools