GUI reference
R&S
®
ZNA
417User Manual 1178.6462.02 ─ 29
Setup Frequency Converting DUT
Opens the Two Tone Group Delay setup dialog.
Measurement
Allows you to select the quantities to be measured.
The "Main Tone" button opens a dialog for quantity selection:
Remote command:
CALCulate<Ch>:PARameter:MEASure '<TraceName>', MixDly | MixPhas
| MixDeriv | Mix_a_LTone | Mix_a_UTone | Mix_b_LTone |
Mix_b_UTone
CALCulate<Ch>:PARameter:SDEFine '<TraceName>', MixDly | MixPhas
| MixDeriv | Mix_a_LTone | Mix_a_UTone | Mix_b_LTone |
Mix_b_UTone
2 Tone Delta Freq.
Allows you to select the frequency delta between upper tone and lower tone.
Remote command:
[SENSe<Ch>:]FREQuency:MDELay:APERture
Meas softtool
To Next Page
Loading...
