Rohde & Schwarz R&S ZNA Series - Page 579

GUI reference
R&S
®
ZNA
579User Manual 1178.6462.02 ─ 29
The upper part of the "Cal Unit" screen displays the calibration sweep diagrams for
the currently measured S-parameter. The lower part visualizes the active port
assignment and the measurement progress.
Figure 5-22: Automatic calibration: standard cal unit
Figure 5-23: Automatic calibration: inline calibration system
2. When you perform a SMARterCal, in a final step:
a) Replace the calibration unit by the power meter.
Cal softtool