Rohde & Schwarz R&S ZNA Series - Page 59

Getting Started
R&S
®
ZNA
59User Manual 1178.6462.02 ─ 29
2. Select the adequate drop position, depending on whether you want to display the
new trace in the existing diagram, or whether you want to add a new diagram. The
highlighted area indicates the target diagram.
3. In the dialog box that is opened when you release the "New Trace" icon, select the
S-parameter to be measured.
For a four-port analyzer:
The R&S ZNA generates a new trace for the selected S-parameter.
Operating the instrument