CAUTION: When installing, be sure guide bracket
and split sleeve touch the rear of the transaxle
case.
Fig. 296 Guide Bracket Disassembled
1 – GUIDE BRACKET
2–PAWL
3 – SPLIT SLEEVE
4 – SPACER
5 – STEPPED SPACER
6 – ANTIRATCHET SPRING
Fig. 297 Guide Bracket
1 – GUIDE BRACKET
2 – ANTIRATCHET SPRING (MUST BE ASSEMBLED AS
SHOWN)
3–PAWL
Fig. 298 Install Guide Bracket Pivot Shaft
1 – PIVOT PIN
2 – GUIDE BRACKET ASSEMBLY
Fig. 299 Install Parking Sprag Pivot Retaining Screw
1 – TRANSFER SHAFT
2 – PARKING SPRAG PIVOT RETAINING SCREW
21 - 102 42LE TRANSAXLE LH
DISASSEMBLY AND ASSEMBLY (Continued)
To Next Page
Loading...
