Chrysler 2000 LHS - Page 396

CHMSL LAMP
Removal
(1) Release the deck lid latch and open deck lid.
(2) Remove the deck lid cover.
(3) Grasp the chmsl lamp socket and rotate coun-
terclockwise. Separate the bulb lamp socket from the
lamp assembly (Fig. 12).
(4) Remove the chmsl lamp assembly fasteners
(Fig. 12).
(5) Remove the chmsl lamp assembly from the
deck lid.
Installation
(1) Install the chmsl lamp assembly into the deck
lid.
(2) Install the chmsl lamp assembly fasteners.
(3) Install the socket into the lamp assembly.
(4) Install the deck lid cover.
Fig. 12 CHMSL Lamp Assembly
1 – CHMSL BULB SOCKET
2 – CHMSL BULB
3 – CHMSL
4 – CHMSL FASTENER
5 – CHMSL FASTENER
LH LAMPS 8L - 19
REMOVAL AND INSTALLATION (Continued)
2000 LHS, 300M, CONCORDE AND INTREPID