POWER SEAT SYSTEMS
TABLE OF CONTENTS
page page
POWER SEATS ............................ 1 MEMORY SEATS........................... 7
POWER SEATS
TABLE OF CONTENTS
page page
DESCRIPTION AND OPERATION
SIDE IMPACT AIRBAG RESTRAINT SYSTEM ....1
POWER SEAT SYSTEM.....................3
POSITION SENSING POWER SEAT
POTENTIOMETERS ......................3
POWER SEAT SWITCH .....................3
DIAGNOSIS AND TESTING
DIAGNOSTIC PROCEDURE..................3
CIRCUIT BREAKER ........................3
POWER SEAT SWITCH DIAGNOSTIC TEST .....4
MOTOR TESTS ...........................4
SWITCH TEST ............................4
VOLTAGE................................4
REMOVAL AND INSTALLATION
SEAT ASSEMBLY..........................6
SEAT ADJUSTER..........................6
SEAT SWITCH ............................6
DESCRIPTION AND OPERATION
SIDE IMPACT AIRBAG RESTRAINT SYSTEM
DESCRIPTION
Vehicles equipped with the side impact airbag
restraint system utilize two airbags mounted to each
front seat back frame (Fig. 1). This system designed
to protect occupants in the event of a side impact col-
lision.
OPERATION
The side impact airbag control module (SIACM)
controls the seat back mounted airbags. If the
SIACM determines the impact is severe enough, the
appropriate airbag/s will inflate, tearing open the
front seat back trim cover/s protecting the passen-
ger/s. Once a seat back mounted airbag has been
deployed, all damaged parts must be replaced.
LH POWER SEAT SYSTEMS 8R - 1
2000 LHS, 300M, CONCORDE AND INTREPID