HEIDENHAIN iTNC 530 HSCI - Position and Speed Encoders

1124 HEIDENHAIN Technical Manual iTNC 530 HSCI
Position and speed
encoders
For linear and torque motors, position encoders are used as speed encoders.
Therefore, they must be connected to the speed encoder inputs (X15 to X20).
In order to adapt the pin layouts for absolute encoders with EnDat interface
(e.g. LC, RCN), you must use the line drop compensator with ID 336697-03,
and for incremental encoders with 1 V
PP
signals (e.g. LB, ROD) you must use
the line drop compensator with the ID 383951-01.
The temperature sensor (KTY 84) can also be connected to both line drop
compensators.
323 897-xx
CC 424
336 376-xx
X15-X20
298 401-xx
CC 424
289 440-xx
X15-X20
KTY
KTY
368 210-02
EnDat
(LC 181; RCN 727; ...)
383 951-01
1V
SS
(LB 38xC; ...)