HEIDENHAIN iTNC 530 HSCI - Handwheel Input; HR 4 Xx (FS) or HR 5 Xx (FS) Portable Handwheel

July 2013 3.41 Handwheel input 383
3.41 Handwheel input
The following handwheels can be used with the iTNC 530 HSCI:
 HR 130 panel-mounted handwheel
 Up to three HR 150 panel-mounted handwheels via HRA 110 handwheel
adapter
 HR 410 (FS) portable handwheel
 HR 520 (FS) portable handwheel with display
 HR 550 wireless handwheel with display and wireless transmission
The handwheels are connected to the iTNC 530 HSCI via X23 on the MB 620
machine operating panel.
3.41.1 HR 4xx (FS) or HR 5xx (FS) portable handwheel
The HR 4xx and HR 5xx are portable electronic handwheels.
For the assignment of the keys of the HR 410 to the PLC inputs and outputs,
see "HR 410 portable handwheel" on page 1510.