July 2013 3.30 HSCI adapter for PLB 6001 (FS) OEM-specific machine operating panel 341
3.30 HSCI adapter for PLB 6001 (FS) OEM-specific machine operating panel
HEIDENHAIN offers the PLB 6001 (FS) HSCI adapter with HSCI interface for
connecting an OEM-specific machine operating panel. The HSCI system
therefore interprets and treats the PLB 6001 (FS) as an MB machine operating
panel.
On the underside of the machine operating panel are terminal strips bearing
the PLC inputs as well as the PLC outputs. Also, connection X23 for HR
handwheels is on the underside of the PLB 6001 (see "X23: Handwheel input"
on page 347).
Please note that the PLB 6001 (FS) is supplied with +24 V NC.
For the entire HSCI system, the +24 V NC supply voltage is required to be
safely separated voltage. The +24 V NC supply voltage must not, under any
circumstances, be connected with the +24 V PLC supply voltage, because
this removes the double basic insulation.
To Next Page
Loading...
