July 2013 3.36 TE 735 (FS) keyboard unit 367
3.36 TE 735 (FS) keyboard unit
TE 735(FS), NC operating panel in stainless steel design, for 15-inch, with
touchpad and integrated machine operating panel
TE 735(FS) pin layout
Connector Function
X2: USB Type B USB connection with BF 750. The TE is connected with
the USB hub of the BF 750. The maximum permissible
cable length for this USB connection is 3 m. The USB hub
of the TE only supports USB 1.1.
X1 Screen soft keys of BF 750 X3 via ribbon cable to
keyboard unit X1
X60 Potentiometer of keyboard unit via ribbon cable
(enclosed) to machine operating panel X10
S, X11 Connection for spindle-speed override potentiometer
(pre-assigned by HEIDENHAIN)
F, X19
Connection for feed-rate override potentiometer. There are
two connections—preassigned by HEIDENHAIN depending
on the arrangement of the feed-rate potentiometer.
E, X17
Connection for rapid-traverse override potentiometer. There are
two connections—preassigned by HEIDENHAIN depending on
the arrangement of the rapid-traverse potentiometer.
F, X16
Connection for feed-rate potentiometer, alternative to X19
E, X22 Connection for rapid-traverse override potentiometer,
alternative to X17
X27 Not used
Protective ground (M5)
X30
X101
X10
X500
X502
X23
X1
X2
X60
X14
X15
X7
X6
X31
X17
X19
E
F
X27
E
F
S
X11
X16
X22
To Next Page
Loading...
