740 HEIDENHAIN Technical Manual iTNC 530 HSCI
Description of the rotary table (without elements for collision monitoring) with
assumed tool reference point:
Selecting a
geometry
description in case
of an error
In order for the machine operator to be able to select another geometry
description in case of an error, abbreviations for the geometry descriptions can
be entered in the DOC column of the assignment table.
To select another geometry description in case of an error:
While in the Programming and Editing operating mode, press the MOD key.
Enter the code number KINEMATIC.
A pop-up window appears with the abbreviation from the DOC column in the
assignment table:
Use the arrow keys to select the appropriate geometry description.
Press the ENT key
The control resets and activates the selected geometry description.
NR KEY AXIS COORD DOC
0 Trans X 420 Translation in X direction
1 Trans Y 148.5 Translation in Y direction
2 Trans Z -190 Translation in Z direction
3 MachAxis Z
4 MachAxis Y
5 MachAxis X
6 MachAxis B
7 Trans Z -125.9 Translation in Z direction
8 MachAxis A
9 Trans Y 2.7 Translation in Y direction
10 Trans Z 331.3 Translation in Z direction
11 MachAxis C End of translation
[END]
To Next Page
Loading...
