HEIDENHAIN iTNC 530 HSCI - Example of a Standard Log Entry

1294 HEIDENHAIN Technical Manual iTNC 530 HSCI
Example of a standard log entry
The following example shows possible entries in the log:
STIB: ON 20.01.2001 14:01:42
INFO: MAIN PGM 20.01.2001 14:01:42
TNC:\mercedes\Mbprog5a.I
INFO: MAIN LINE 20.01.2001 14:01:42
0
STIB: OFF 20.01.2001 14:01:44
INFO: MAIN PGMEND 20.01.2001 14:01:44
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 02 00 02 00 00 00 33 00 00 00 11
INFO: MAIN PGMEND 20.01.2001 14:01:44
Stop reason: Positioning error
Error : 51
Error class: "Positioning"
NC program : TNC:\mercedes\Mbprog5a.I line 17
INFO: MAIN PGMEND 20.01.2001 14:01:44
Actual pos.:
X = 1.8251
Y = -9.2372
Z = 45.0030
A = 0.0000
B = 359.9999
C = 0.0000
W = 65.9894
Preset : (Range = 0)
X = -8.6201
Y = 7.5515
Z = -1835.3142
A = 0.0000
B = 0.0000
C = 0.0000
W = -178.8965
Datum shift:
X = 0.0000
Y = 0.0000
Byte 0 Byte 15