HEIDENHAIN iTNC 530 HSCI - Mounting Attitude MC 6 Xxx, CC 61 Xx, UV XXX, um XXX, UE 2 Xx B

July 2013 3.2 Environmental conditions 189
3.2.5 Mounting attitude MC 6xxx, CC 61xx, UV xxx, UM xxx, UE 2xx B
Attention
 When mounting, please observe proper minimum clearance, space
requirements, length and position of the connecting cables.
 Please ensure during installation that the components are properly
screwed to the wall of the electrical cabinet by using all of the provided
cutouts (holes). For example, the MC 6x4x, CC 61xx each provide four
cutouts for fastening.
Leave space for servicing and
connecting cables!
Leave space for air circulation and
servicing!
Leave space for servicing!
Leave space for air circulation!
Temperatures of > 150 °C are
possible with UE 21xB with
integral braking resistor. Do not
mount any temperature-sensitive
components!
Air out
Air in
PSL 130, UV(R), UE, UM, CC 61xx