July 2013 9.1 PLC Functions 1683
For example, to compile any PLC program:
Press the SELECT + COMPILE soft key: the iTNC displays the soft keys for
the SELECT + COMPILE function.
Press the SELECT PLC-MAIN PROGRAM soft key: the iTNC opens the
program manager.
Use the arrow keys to select the PLC program to be compiled.
Press the ENT key.
The name and path of the compiled PLC program are entered with PLCMAIN=
in OEM.SYS.
Press the COMPILE PLC-MAIN PROGRAM soft key if you only want to
compile the PLC program from this entry.
PLC Marker M4188 is set at the beginning of each compilation process in the
PLC project. Marker M4188 is reset as soon as the initialization of all
components involved in the compilation process has been completed and the
PLC has been started.
9.1.10 ADVANCED SETUP
Press the ADVANCED SETUP soft key to get additional settings:
Set Reset
M4188 Compilation process of the PLC
project active
NC NC
Soft key Function
Settings for the XFCE Window Manager, see page 1332
Managing software options via the SIK, see page 140
Creation and settings of the encoded PLC partition (PLCE),
see page 1690
Optimization, adjustment and changing of the kinematics with
KinematicsDesign on the control, see page 1488
Return to PLC main menu
To Next Page
Loading...
