HEIDENHAIN iTNC 530 HSCI - Status of Options that Have Been Set

146 HEIDENHAIN Technical Manual iTNC 530 HSCI
Status of options
that have been set
Module 9067 Status of software settings
PLC Module 9067 enables you to request status information about software
settings. Module 9067 can currently be used to interrogate the software
options set in the SIK.
Call:
PS B/W/D/K <Mode>
0: Interrogate whether SW option is set in the SIK
PS B/W/D/K <Number>
If mode is 0: Number of SIK option
CM 9067
PL B/W/D <Status>
Status of SIK option (if mode is 0):
0: Not set
1: Set
Error code:
Marker Value Meaning
M4203 0 Function was performed correctly
1 Error code in W1022
W1022 1 Invalid value for number
2 Invalid value for mode