HEIDENHAIN iTNC 530 HSCI - Variable Names

1360 HEIDENHAIN Technical Manual iTNC 530 HSCI
Variable names:
Variable names Meaning
B<address> PLC bytes, integer
W<address> PLC words, integer
D<address> PLC double words, integer 0/1
M<address> PLC markers, integer 0/1
I<address> PLC inputs, integer 0/1
O<address> PLC outputs, integer 0/1
T<address> PLC timers, integer 0/1
C<address> PLC counters, integer 0/1
S<address> PLC strings, string [128]
S#D<Number> PLC dialogs, string
S#E<Number> PLC error texts, string
TIME[0] to TIME[15] System time as in Module 9055, char
AXISCHAR[Number] Code letters for NC axis, char
MP<number> Machine parameters, notation: MP910.1 Input
value:
Decimal places: double
Hex or binary: integer
Text: char
Time
HOUR int No. of hours from real-time clock
MIN int No. of minutes from real-time clock
SEC int No. of seconds from real-time clock
DAY int Day from real-time clock
MONTH int Month as no. from real-time clock
YEAR2 int Two-digit year no. from real-time clock
YEAR4 int Four-digit year from the real-time clock
Settings for the tool touch probe
TT.RAD double Calibrated radius of TT
TT.CENTER[3] double Calibrated center of TT
TT.PNT1[3] double Calibrated touch point 0 of TT
TT.PNT2[3] double Calibrated touch point 1 of TT
TT.PNT3[3] double Calibrated touch point 2 of TT
TT.PNT4[3] double Calibrated touch point 3 of TT