1874 HEIDENHAIN Technical Manual iTNC 530 HSCI
Mount settings The configuration options for connecting a network drive after entering the
code number NET123 have been adapted to the display of the network
settings.
Press the MOD key in the Programming and Editing operating mode and
enter the code number NET123. Use the soft keys to select the required
network options:
Or you can open the Mount settings as follows:
Make the taskbar at the bottom of the screen visible by moving the mouse
pointer over it.
Press the green HEIDENHAIN button to open the JH menu.
Select the Settings menu item.
Select the Share menu item.
Soft key Meaning
Definition of the devices in the network that can be addressed
from the iTNC. The network settings for connecting the
iTNC 530 to a network are divided into several pages of a
window, which can be selected by tabs.
To Next Page
Loading...
