July 2013 8.1 Display and operation 1349
Shutting down or
rebooting an
external computer
To set up a connection with which you can configure the automatic shutdown
of a Windows computer, select Switch-off/restart of a computer and click
Add Connection to configure a new connection or Edit Connection to change
an existing one:
Details
Computer: Command to be executed
Full-screen
mode
Show display of the external computer in
full-screen mode. Only useful, if the
resolution of the external computer
matches the resolution of the control
screen (BF).
User-defined
window size
Definition of the window size for the display
of the external computer or connection. As
a rule, the window size should correspond
to the resolution of the external computer
or connection, as long as it is lower than the
resolution of the control screen.
Menu item Function
To avoid loss of data or damage to the Windows system, you should
configure an automatic shutdown of the Windows computer together with
the shutdown of the TNC.
To Next Page
Loading...
