July 2013 6.5 Tilting and swivel axes 769
MP7530 Type of dimension for transformation
Input: Entry of a formula is possible, see page 479
0: Free tilting axis
MP7530.0–14Transformation 1 to transformation 15
MP7550 Home position of the tilting element
Input: –99 999.9999 to +99 999.9999
MP7550.0 A axis
MP7550.1 B axis
MP7550.2 C axis
MP7682 Machine parameter with multiple function
Input: Bit 1 – Reference value for calculating the preset during "datum
setting"
0: Actual value is calculated
1: Nominal value is calculated
Bit 9 – Apply tilting of the working plane
0: The status of the Tilt working plane function is not applied
to the Manual operating mode during a program interruption
(behavior until now).
1: The status of the Tilt working plane function is applied to
the Manual operating mode during a program interruption.
MP7530 cannot be overwritten with Module 9031 (overwrite machine
parameters), since the MP contains a string, but the module transfers an
integer value.
To Next Page
Loading...
