July 2013 3.34 TE 645Q (FS) keyboard unit 361
Connection
overview for the
TE 645Q
TE 645Q, 19-inch keyboard unit, integrated machine operating panel
TE 645 Q pin layout
Connector Function
USB Type B USB connection to BF 2xx. The TE 6xx is connected to
the USB hub of the BF 2xx. The maximum permissible
cable length for this USB connection is 3 m. The USB hub
of the TE 6xx only supports USB 1.1.
X40: USB Type B USB connection to USB connector on the front of the TE
USB Type A Freely available USB connection (USB 1.1)
Maximum load capacity of USB output: 1 x 100 mA
X1 Screen soft keys of BF 2xx X3 via ribbon cable to
keyboard unit X1
X60 Potentiometer of keyboard unit via ribbon cable to
machine operating panel X10
X52 (S) Connection for spindle-speed override potentiometer
X51 (F) Connection for feed-rate override potentiometer
X62 (E) Connection for rapid-traverse override potentiometer,
alternative to X61
X55 Connection for feed-rate potentiometer, alternative to
X51
X61 Connection for rapid-traverse override potentiometer
Protective ground (M5)
X30
X101
X10
X23
X502
X500
X7 X6 X31
X40
USB Typ B
X1
USB Typ A
X52
X51
X62
X60
X61
X65
To Next Page
Loading...
