HEIDENHAIN iTNC 530 HSCI - Display;Delete PLC Soft-Key Row; Soft-Key Rows

July 2013 8.3 PLC soft keys 1389
8.3.3 Soft-key rows
With Module 9200 you can display entire soft-key rows. With Module 9201
you can show individual soft keys. With Module 9202 you can switch to the
display with PLC soft keys and PLC windows.
Display/delete PLC
soft-key row
 In the system file PLC:\PLCSOFTK.SYS, enter the names and path of the
required soft-key files. With the sequence of your entries you specify the
soft-key number: Line 0 = soft-key number 0, etc. One soft-key level can
consist of up to four soft-key rows, i.e. 32 soft keys per level.
 When calling the module, indicate the row to be displayed first.
 With the transfer parameter, specify how the soft keys should be displayed:
• After the screen management key is pressed, i.e. after the PLC window
is selected.
• In the current operating mode:
In this case the NC soft keys are overwritten.
 Specify whether the NC soft keys should be overwritten or whether the PLC
soft keys should be appended to the NC soft keys. If you append the PLC
soft keys, a separate list is opened. Only one PLC soft-key row can be
appended.
Set Reset
W302 Number of the horizontal PLC soft
key that was pressed
NC NC