HEIDENHAIN iTNC 530 HSCI - Module 9035 Read Status Information

July 2013 8.15 Tool changer 1615
Module 9035 Read status information
Call:
PS B/W/D/K <Number of the status information>
50: Tool change sequence
(see FN18: SYSREAD ID61 NR0)
51: Pocket number for reserve
52: Magazine number for reserve
53: Pocket number for insertion
54: Magazine number for insertion
CM 9035
PL B/W/D <Status information>
Error code:
Marker Value Meaning
M4203 0 No error
1 Error code in W1022
W1022 1 Status information invalid
20 Call was not in a submit or spawn job